Filter
Top Products
2-1 Control Panel
2-8 Chapter 2 Locations and Functions of Parts and Controls
Chapter 2 Locations and Functions of Parts and Controls
!º Numeric buttons and +/– buttons
Press to input time data or edit points data at the cursor
position in menu display. Press buttons 0 to 5 while
holding down the SFT button to input A to F
(hexadecimal figures) for user bits. Use the +/–
buttons to increase or decrease settings.
!¡ SFT (shift) button
Press buttons 0 to 5 while holding down this button to
input A to F (hexadecimal figures) for user bits.
Use also in combination with other buttons to perform
other operations.
!™ RCL (recall) button
Press to call up a previously entered value.
!£ CLR (clear) button
Press to clear a value.
!¢ SET button
Press to enter a value.
!∞ AUDIO IN/OUT buttons
Press to set AUDIO IN and OUT points during insert
mode. Press either AUDIO IN or OUT button while
holding down the ENTRY button to set an audio edit
point.
!§ IN/OUT buttons
Press to set an IN or OUT point during editing. Press
either button while holding down the ENTRY button
to set an edit point.
!¶ ENTRY button
Press to enter an edit or cue point.
While holding down this button, press either the
AUDIO IN or OUT button, or the IN or OUT button.
!• Cursor control buttons
Press to move the cursor in the menu display. Move
the cursor as required to enter a value using the
numeric buttons, or to change a menu setting.
!ª PREVIEW button
Press to view the results of an edit on a monitor
connected to the recorder VTR without actually
recording the edit. During previewing, the tape moves,
but actual editing is not carried out. If no IN point has
been set when you press this button, the current tape
position is set as the IN point at the start of the
preview.
@º AUTO EDIT (automatic editing) button
Press to do automatic editing after you have set the
edit points. If no IN point has been set when you press
this button, the current tape position is set as the IN
point at the start of automatic editing.
@¡ REVIEW button
Press to review results of an edit (a section between
one IN point and one OUT point) on a monitor
connected to the recorder.
@™ PLAYER/RECORDER buttons
Select which VTR is to be controlled by this VTR’s
control panel during editing when this VTR is used as
a recorder and an external VTR connected to the
REMOTE1-IN(9P)/OUT(9P) connectors as a player.
PLAYER: The tape transport buttons and editing
operation buttons on the control panel control the
external player VTR.
RECORDER: The tape transport buttons and
editing operation buttons on the control panel
control the recorder VTR (this VTR).
The PLAYER/RECORDER buttons have no effect
when using this VTR alone.
@£ PREREAD indicator
Lights up during preread mode.
For details on prereading, refer to “6-2-4 Performing
Preread Editing” on page 6-18.