Filter
Top Products
Chapter 4 Menu Settings 4-9
Chapter 4 Menu Settings
4 Press the G or g button to move the cursor (z) to
the number of the memory bank in the IC memory
card whose contents are to be recalled.
5 To change the title of the memory bank, press the
[F6] (EDIT TITLE) button.
You can also change a title after recalling its
respective contents from the memory bank.
For details, refer to“4-1-6 Adding Titles to the Data”on
page 4-11.
6 Press the F button to move the cursor (z) to the
VTR side, then press the G or g button to move
the cursor to the VTR memory bank number where
the recalled data are to be stored.
To change the current VTR menu settings
Move the cursor (z) to [C] (CURRENT SETUP).
To replace all VTR memory bank contents
with IC memory card data
Press the [F7] (SELECT ALL) button.
7 Press the [F9] (COPY) button.
A message asking you to confirm the operation
appears in the display.
(Continued)
8 Press the [F6] (EDIT TITLE) button to add a title
to the cue point list.
For details, refer to “4-1-6 Adding Titles to the
Data”on page 4-11.
9 Press the [F10] (EXIT) button.
The SET UP menu or the menu displayed before
you pressed the ACCESS button appears again.
Recalling the contents of an IC memory
card
The contents stored in an IC memory card can be
recalled to the current VTR bank or VTR memory
bank.
Recalling the contents of an IC memory card
1 Press the SET UP button.
The SET UP menu appears in the display.
2 Press the [F2] (MEMORY CARD) button.
The MEMORY CARD menu appears in the
display.
You can access MEMORY CARD menu directly
by pressing the ACCESS button.
3 Press the [F8] (DIRECTION) button to select >>.
5
91 4,63
7,8
2
BÅSEBÅLL EDIT
MEMORY CÅRD
MEMORY CÅRD VTR BÅNK
SETUP BÅNK1 CURRENT SETUP
TCR 00:00:00:00
0 ç BÅSEBÅLL
BÅSEBÅLL 1 1
(PRESET) 2 2
(PRESET) 3 3 FOOTBÅLL12
4 4 (PRESET)
5 5
6 6 (PRESET)
(PRESET) 7 7
8 8
FORMÅT
CÅRD
SHOW
SETUP
SHOW
CUESET
COPY EXIT
EDIT
TITLE
SELECT
ÅLL
DIREC-
TION
>>
ƒ (PRESET)
...
...
Bank number in
the IC memory card
BÅSEBÅLL EDIT
MEMORY CÅRD
MEMORY CÅRD VTR BÅNK
SETUP BÅNK1 SETUP BÅNK 7
TCR 00:00:00:00
0 ç BÅSEBÅLL
BÅSEBÅLL 1 1
(PRESET) 2 2
(PRESET) 3 3 FOOTBÅLL12
4 4 (PRESET)
5 5
6 6 (PRESET)
(PRESET) 7 7
8 8
FORMÅT
CÅRD
SHOW
SETUP
SHOW
CUESET
COPY EXIT
EDIT
TITLE
SELECT
ÅLL
DIREC-
TION
ƒ (PRESET)
...
...
VTR memory
bank number
BÅSEBÅLL EDIT
MEMORY CÅRD
MEMORY CÅRD VTR BÅNK
SETUP BÅNK1 CURRENT SETUP
TCR 00:00:00:00
0 ç BÅSEBÅLL
BÅSEBÅLL 1 1
(PRESET) 2 2
(PRESET) 3 3 FOOTBÅLL12
4 4 (PRESET)
5 5
6 6 (PRESET)
(PRESET) 7 7
8 8
FORMÅT
CÅRD
SHOW
SETUP
SHOW
CUESET
COPY EXIT
EDIT
TITLE
SELECT
ÅLL
DIREC-
TION
>>
ƒ (PRESET)
...
...