Filter
Top Products
Menu List
A-36 Appendix
Appendix
%
Item Settable range
907
a)
(with optional
BKDW-507)
PITCH
CORRECTION
IN P.PLAY
Item number
[0]
1
Specifies whether the pitch correction is conducted in
digital audio signal processing during playback in program
play mode.
0 : Pitch correction is conducted.
1 : Pitch correction is not conducted.
When the pitch correction is not conducted, an audio signal
whose pitch changes according to the tape speed is output
from SIF, AES/EBU, and ANALOG AUDIO OUTPUT
connectors.
However, the sampling rate for digital audio output (SIF and
AES/EBU) signals are converted (rate-converted) to 48 kHz.
[on]
off
Function
Pitch information (musical interval) is necessary for
carrying out pitch correction of digital audio signals in
channels 1 and 2. This item specifies the channel from
which this information is detected.
Pitch correction is simultaneously executed in channels 1
and 2 according to the detected information.
0 : Detects the pitch information from the audio signal in
channel 1.
1 : Detects the pitch information from the audio signal in
channel 2.
2 : Detects the pitch information from the average of the
audio signals in channels 1 and 2.
908
a)
(with optional
BKDW-507)
0
1
[2]
909
a)
(with optional
BKDW-507)
PITCH DET FOR
CH3/CH4 IN
P.PLAY
0
1
[2]
910
a)
(with optional
BKDW-507)
PLAY MODE
AFTER P.PLAY
[0]
1
Specifies the operation of the VTR when it changes from
program play mode to play mode.
0 : The speed deviation of 0% of program play mode is
maintained for video and audio signals even when
changing to play mode.
1 : When changing to play mode, the servo is re-locked to
the reference signal. Some disturbance in the audio and
video signals will occur at this time.
To prevent picture disturbance when the VTR changes
from program play mode to mode other than play mode,
set items 905 and 906 to a setting other than “disable”.
PITCH DET FOR
CH1/CH2 IN
P.PLAY
[p.play0]
normal play
ch3
ch4
[ch3+ch4]
ch1
ch2
[ch1+ch2]
Pitch information (musical interval) is necessary for carrying
out pitch correction of digital audio signals in channels 3
and 4. This item specifies the channel from which this
information is detected.
Pitch correction is simultaneously executed in channels 3
and 4 according to the detected information.
0 : Detects the pitch information from the audio signal in
channel 3.
1 : Detects the pitch information from the audio signal in
channel 4.
2 : Detects the pitch information from the average of the
audio signals in channels 3 and 4.
a) This item is displayed when the BKDW-507 is installed.