Filter
Top Products
Chapter 1 Overview
Chapter 1 Overview 1-3
1-1-2 Features of the BKDW-515
The BKDW-515 Control Panel provides six menu
screens corresponding to the six operation modes to
allow fast and easy adjustment of necessary settings, as
well as the ability to store menu settings to a memory
card for later recall.
Menu-driven operations for a variety of
purposes
Six types of menus appear on the BKDW-515’s 90 ×
72 mm (35/8 inches × 27/8 inches) display, and are set
using the 10 /function buttons to the left and at the
bottom of the display.
HOME menu
Use this menu to make the basic settings for recording,
playback, and editing operations, and to select
channels to be edited during insert editing.
TC menu
Use this menu to make time code settings.
CUE menu
Use this menu to set up to 100 cue points. In page
mode, 10 cue points per page can be set on a total of
10 pages.
PF1/PF2 (Personal Function) menus
Use these menus to register up to 40 of the most
frequently used items from the other menus (up to ten
items each can be registered to PF1, ALT+PF1, PF2
and ALT+PF2). You can display the registerable items
by pressing the [F4] (PF1&2 ASSIGN) button in the
SET UP menu.
SET UP menu
•Use the VTR BANK menu to memorize menu
settings of up to 8 pages.
•Use the MEMORY CARD menu to store current
settings of the VTR and up to 8 pages of the contents
of the VTR memory bank to an IC memory card.
•Use the scrollable PF1&2 ASSIGN menu to display
the items that can be registered in the PF1/PF2
menus, and to select and register the most frequently
used menu items.
•Use the scrollable VTR SETUP menu to display the
items necessary for making initial settings, and to
directly change settings without registering them to
the function buttons for each menu.
•Use the PANEL SETUP menu to set control panel
operations, such as the keyboard sound output.
MAINTENANCE menu
Use this menu to access the maintenance functions in
conjunction with a video monitor.
For details, refer to the Installation and Maintenance
Manual.
A full complement of storage/recall
functions
These functions allow you to store and recall menu
settings in either the VTR’s internal memory banks or
IC memory cards by title.
VTR memory banks
These memory banks allow you to store up to eight
pages of VTR settings in addition to the current VTR
settings. Factory settings are also stored here, allowing
the VTR to be reset to these values at any time.
IC memory cards
Each IC memory card can hold the current VTR
settings as well as up to eight pages of settings. A
single IC memory card thus allows you to store and
recall the entire contents of the VTR memory banks.
Title function
This function allows you to add titles when storing data
to the VTR memory bank or IC memory card, thus
facilitating data retrieval and management.
A full range of editing functions
You can connect two DVW-A500/1 or DVW-500/1
series units to enable automatic or manual editing in
either assemble or insert mode. The VTR also features
a full range of editing functions, including preview,
review, preroll, and the setting or changing of edit
points.
Quick access to edit points
The following methods are provided for the setting of
edit points:
•Multi-cuing for up to 100 edit points
• Search dial with shuttle and jog functions
•Direct input through numeric buttons