Sony BKDW-507 DVR User Manual


  Open as PDF
of 164
 
Menu List
A-20 Appendix
Appendix
Items Related to Recording Protection (500s)
The values enclosed in a box are factory settings.
Item number Item Function
STILL TIMER
00
01
02
03
04
05
06
07
08
09
10
11
12
13
[14]
15
0.5 sec
5 sec
10 sec
20 sec
30 sec
40 sec
50 sec
1 min
2 min
3 min
4 min
5 min
6 min
7 min
[8min]
30 min
Select the amount of time elapse after which the VTR to
automatically enters tape-protect mode, for the purpose of
protecting the video head and tape.
This is the time between stopping of the tape (stop mode or
still-picture mode in search mode) and the change to
tape protection mode.
The selectable range of time is from 0.5 second to 30
minutes.
TAPE
PROTECTION
MODE FROM
SEARCH
[0]
1
2
Specifies the tape-protect mode the VTR changes to from
still-picture mode while searching.
The unit enters automatically the specified tape-protect
mode after the time specified in item 501 has elapsed.
0 : A two-second step advance is repeated in forward
direction at 1/30 times normal tape speed.
1 : The VTR enters standby off mode (standby is
canceled).
2 : The VTR enters tension release mode (tape tension is
released).
Settable range
Specifies the tape-protect mode the VTR changes to from
the stop mode.
The unit automatically enters the specified tape-protect
mode from the stop mode after the elapse of time specified
by the item 501.
0: The VTR enters standby off mode (standby is
canceled).
1: The VTR enters tension release mode (tape tension is
released).
[0]
1
TAPE
PROTECTION
MODE FROM
STOP
Sets the drum rotation to on or off during standby-off mode.
0: Drum rotation is stopped.
1: Drum rotation continues.
DRUM ROTATION
IN STANDBY OFF
[0]
1
Sets the tape tension control in still-picture mode.
0: Maintains the tape tension that ensures uneffected
playback even in still-picture mode.
(This is the normal setting for VTR operations.)
1: Sets the tape tension lower than that of the “0” setting
after the VTR enters still-picture mode. In this case,
picture playback is not ensured. (For long standbys
(e.g., LMS) in still-picture mode, this setting is
recommended.)
[0]
1
STILL TENSION
501
502
503
504
505
[stepfwd]
standby off
tension release
[standbyoff]
tension release
[off]
on
[normal]
loose
 previous next