Filter
Top Products
4-1 Registering and Storing Menu Settings
4-12 Chapter 4 Menu Settings
Chapter 4 Menu Settings
4-1-7 Details on VTR Memory
Bank and IC Memory Card
Functions
Most setting of most items can be stored to a VTR
memory bank or an IC memory card, with the
exception of the settings described below:
Data that can be stored to/recalled from a VTR
memory bank or IC memory card
• Settings of items in the VTR SETUP menu (with the
exceptions listed below)
•Contents of the PF1/2 menus
•VTR memory bank titles
Data that cannot be stored to a VTR memory
bank or an IC memory card
Settings of the following items in the VTR SETUP
menu are not stored to memory:
• 603. ID CODE
• Items related to the hours meter (H01 to H14)
Current settings are always maintained for these items.
4-1-8 IC Memory Card Data
Compatibility Among the DVW-
A500/1 and DVW-500/1 Series
VTRs
IC memory card data recorded on one DVW-A500/1
series or 500/1 series VTR (VTR A) can be read into
the VTR memory banks of another DVW-A500/1
series or DVW-500/1 series VTR (VTR B) and
equipped with the BKDW-515. If both VTRs are
identical in model and optional accessories, the entire
IC memory card contents are read and applied as is. If
the VTRs differ either in model or optional
accessories, the following will occur:
• Settings for those items that are common to both
VTR A and VTR B are read (i.e, items that are
common to most VTRs and unaffected by series or
configuration differences).
• Settings that exist on VTR B but not on VTR A
remain unchanged.
For example, if VTR A is a DVW-500/1 and VTR B
is a DVW-A500/1, the analog Betacam playback
settings on VTR B are not changed by data input
from the IC memory card.
• Settings for items that exist only on VTR A are not
read.
• Settings for items that exist only on VTR A and have
been assigned to the PF1/2 menus are not read, and
the respective function buttons do not appear in menu
display on the BKDW-515 attached to VTR B.