Honeywell HRHD 410 DVR User Manual


 
Operation
Rev 3.03 84 Document 900.0315
02/07
Digital Zoom Playback Mode
Press the PTZ button while in Playback mode to enter Digital Zoom Playback mode.
The image pauses and a bright small box is laid over the image. This box indicates the
spot to be enlarged. To enlarge that spot, move the position of the box using the Arrow
buttons, and then press . The enlarged screen displays . Press PTZ again to
release the Digital Zoom Playback mode and return to Playback mode.
Note You cannot enter Digital Zoom Playback mode when the
selected camera is set up as Cover 1 or Covert 2 and not played
back.
ENTER/PAUSE Pause the video on the screen. The screen displays
Camera Buttons 1 to 4 Display that camera at full screen.
QUAD/SEQ Change the display format from full screen to quad (2x2) mode.
Note Changing the display format from quad (2x2) to full screen is
not available.
Note When playing recorded video at maximum speed with very
high image quality, playback of recorded audio may be
occasionally interrupted.
Shuttle Ring The Shuttle Ring only functions in Playback mode. Turn the ring
clockwise to play video forward. Turn the ring counterclockwise to
play video backward. Playback speed varies with the amount the ring
is turned. The playback speeds are Wx0.5, WW, WWW, and
WWWW, Xx0.5, X, XX, XXX, and XXXX.
When you release the ring, it snaps back to the center position and
the video pauses.
Jog Dial The Jog Dial only functions when playback video has been paused.
Turn the jog dial clockwise to play video forward image-by-image.
Turn the jog dial counterclockwise to play video backward
image-by-image.
Note When playing recorded video at maximum speed with very
high image quality, playback of recorded audio may be
interrupted occasionally.
Note You cannot change the system setup from a remote site
during Playback mode.
Table 4-1 Playback Controls (cont’d)
Press this button … To do this …