Filter
Top Products
Configuration
Rev 3.03 58 Document 900.0315
02/07
When it is On, the DVR notifies the remote site when it loses video input from a
camera based on a defined schedule.
Note For the Notify action to work, the DVR should be registered in the
RAS (Remote Administration System).
Display Setup
Highlight OSD or Main Monitoring in the Display menu, and then press to set up the
on-screen display or camera display on the main monitor.
OSD (On-Screen Display) Setup
Use the OSD Setup screen (MENU ➤ Display ➤ OSD) to set the DVR to display Date,
Time, Title and Status on screen. Each feature can be turned on or off. You can also set
up where you want the video to display on the screen by adjusting the margins.
Figure 3-46 OSD Setup Screen
1. Highlight the box beside Date and then press to toggle the date display On and
Off.
2. Highlight the box beside Time and then press to toggle the time display On and
Off.
3. Highlight the box beside Title and then press to toggle the camera title display
On and Off.