Filter
Top Products
Configuration
Rev 3.03 65 Document 900.0315
02/07
Note Entering the ID and Password and highlighting OK reads the
current IP Address of the DVR configured by the ADSL network.
Note If the DVR is configured for DHCP or an ADSL network, the IP
Address of the DVR might change whenever the unit is turned
on.
Modem Setup
Use the Modem Setup screen to configure your modem.
Figure 3-53 Modem Setup Screen
The Use field displays the available modem type: External Modem.
1. Highlight the box beside Baud Rate of the RS232 field and then press . A list of
baud rates ranging from 300 to 115,200 displays.
2. Highlight the box beside Data Bit of the RS232 field. Press to toggle between 7
bit and 8 bit formats.
3. Highlight the box beside Stop Bit of the RS232 field. Press to toggle between 1
and 2 Stop Bits.
4. Highlight the box beside Parity of the RS232 field and then press . A drop-down
list displays. You can select from None, Odd, or Even parity.
5. To save your changes, highlight OK and then press . Select Cancel to exit the
screen without saving the changes.