Filter
Top Products
Configuration
Rev 3.03 21 Document 900.0315
02/07
Figure 3-2 Admin Password Screen
2. Enter the password by pressing the appropriate combination of Camera buttons
and then ENTER ( ). The factory default password is 4321. There are two Setup
screens: Quick Setup and Normal Setup. The factory default is the Quick Setup
screen.
Quick Setup Screen
Figure 3-3 Quick Setup Screen
Use the Quick Setup screen to set up the most commonly used features of your DVR.
Use the Arrow buttons to move through the options. Pressing lets you make your
selections.
1. Highlight the box beside Quick Setup and then press to toggle between On
and Off. If you select Off, you will use the Normal Setup screen to change the DVR
settings.
2. Highlight the Recording Speed/Quality box and select recording speeds from as
few as 0.5 ips to as fast as 30 ips (25 for PAL).
3. Highlight the second box beside Recording Speed/Quality and select recording
speeds from as few as 0.5 ips to as fast as 30 ips (25 ips for PAL).
4. Highlight the box beside Audio Recording and select either On or Off.