Filter
Top Products
Configuration
Rev 3.03 75 Document 900.0315
02/07
Load / Save Setup
You can load saved DVR settings or save the current DVR settings. To load the saved
settings:
1. Connect the USB device containing the setup file (.cfg) to the DVR.
2. Highlight Load — File Name and press . The Load Setup screen displays setup
file names that are available.
3. Select the desired setup file and press OK. The selected file name is displayed in
the File Name field.
4. Select Load to load the selected saved settings and change the DVR settings
accordingly.
Note Even after changing the DVR settings by loading saved settings,
the time-related settings (Date/Time, Time Zone and Daylight
Saving Time) will NOT be changed.
Note If you want to change the network settings, check Include
network setup. Otherwise, the network settings will NOT be
changed.
To save the current settings:
1. Connect the USB device to the DVR.
2. Highlight Save — File Name and press . A virtual keyboard allows you to enter
the file name.
3. Selecting Save will save the current DVR settings in .cfg file format on the USB
device.
Figure 3-61 Load / Save Setup Screen