Filter
Top Products
Configuration
Rev 3.03 55 Document 900.0315
02/07
Figure 3-41 Text-In Event Action (Alarm Out) Screen
1. Highlight the Sched box and then press . A schedule screen displays. Set the
schedule as described earlier.
2. Highlight the Alarm Out box and select either Beep or the alarm output terminal
that you want to associate with the motion event.
3. Highlight the Dwell Time box and set the length of time you want the output
activated.
Text-In Event Action (Notify) Setup Screen
Use this screen to set the DVR to notify the remote site in the case of a text-in event.
Figure 3-42 Text-In Event Action (Notify) Screen
1. Highlight the Sched box and then press . A schedule screen displays. Set the
schedule as described earlier.
2. Highlight the Notify box and then press . This toggles between On and Off.
When it is On, the DVR notifies the remote site when it has text input from a text-in
device based on a defined schedule.