Filter
Top Products
Configuration
Rev 3.03 44 Document 900.0315
02/07
Configuring Recording Settings
Note When the DVR is recording video, the REC LED on the front
panel is lit and a red dot appears on the monitor.
Your DVR offers a variety of flexible recording modes:
• You can set it up to record all the time or to only record events.
• It can be set up to continue recording after the hard disk drive is full by recording
over the oldest video.
• You can set it up to alert you when the hard disk is full and stop recording.
Record Mode Setup Screen
Access the Record Mode Setup screen (MENU ➤ Record ➤ Record Mode). The
Record Mode Setup screen displays.
Figure 3-30 Record Mode Setup Screen
1. Highlight the box beside Resolution and then press . This toggles between
Standard and High.