Filter
Top Products
Configuration
Rev 3.03 27 Document 900.0315
02/07
Note The clock will not start running until you have restarted the unit,
so you may wish to set the time last.
3. Highlight the box beside Time Zone and press . Select the time zone you are in
from the list and press .
4. Highlight the box beside Daylight Saving Time and press . Pressing toggles
between On and Off.
5. Highlight the Holiday Setup… box and press . You can set up holidays by
highlighting Add: and pressing . The current date displays.
6. Highlight the month and day and change them by using the Up and Down Arrow
buttons. Press to add the date. Dates can be deleted by highlighting the X
beside the date and pressing .
Note Holidays that do not fall on the same date each year should be
updated after the current year’s holiday has passed.
Figure 3-10 Holiday Setup Screen
To save your changes, highlight OK and then press . Select Cancel to exit the screen
without saving the changes.
Highlight the Time Sync… box on the Date/Time Setup screen, and . You can
synchronize the DVR time with any standard time servers that are available in most time
zones and countries, or synchronize time between two different DVRs.