Filter
Top Products
Configuration
Rev 3.03 35 Document 900.0315
02/07
1. To hide the video associated with a camera number, highlight the camera Setup
heading and then press . You can select the Setup field for one specific camera
or select the Setup heading to change the settings for all four cameras at once.
Select from the following options in the drop-down list:
On, Off, Covert 1, Covert 2
Note When you select Covert 1, the DVR displays the camera title and
status icons on the covert video. When you select Covert 2, the
DVR displays only camera title on the covert video.
2. To assign titles to each camera, highlight the camera title under the Title heading
and then press . A virtual keyboard (see Figure 3-7) allows you to enter camera
names.
3. Selecting the PTZ Device box causes a list of controllable cameras to display.
Select your camera from the list and then press . You must connect the camera
to the RS485 terminal on the back of the DVR following the camera manufacturer's
instructions.
Figure 3-19 PTZ Device List
4. To assign IDs to each camera, highlight the ID heading and then press . To
change the number, highlight it and use the Up and Down Arrow buttons to
increase and decrease the numbers. The camera ID number can be set from 0 to
256.
Alarm In Setup Screen
The alarm terminal strip on the back of the DVR has inputs associated with each alarm.
Use the Alarm In screen to configure each alarm input. Highlight Alarm In in the Device
menu (MENU
➤ Device ➤ Alarm-In) and then press . The Alarm In setup screen
displays.