Filter
Top Products
Configuration
Rev 3.03 52 Document 900.0315
02/07
1. Highlight the Sched box and then press . A schedule screen displays. Set the
schedule as described earlier.
2. Highlight the Camera box and then press . A camera selection screen displays.
Select the camera number you would like to associate with the camera that has
detected motion.
Note You can associate multiple cameras with a camera that detects
motion.
3. Highlight the Speed box and select number of images per second you would like
to record from the drop-down list.
4. Highlight the Quality box and select the image quality you want to record from the
drop-down list.
5. Highlight the Dwell Time box and set the length of time you would like to record
for the associated motion event.
Motion Detector Event Action (Alarm Out) Setup Screen
Use this screen to set the DVR to react to motion events differently by activating an
internal buzzer and/or external alarms.
Figure 3-38 Motion Detector Event Action (Alarm Out) Screen
1. Highlight the Sched box and then press . A schedule screen displays. Set the
schedule as described earlier.
2. Highlight the Alarm Out box and select either Beep and/or the alarm output
terminal that you want to associate with the motion event.
3. Highlight the Dwell Time box and set the length of time you want the output
activated.