Filter
Top Products
Configuration
Rev 3.03 62 Document 900.0315
02/07
LAN Setup — Manual
Note Obtain the appropriate IP Address, Gateway and Subnet Mask
from your network administrator.
Change the numbers by highlighting them and using the Up and Down Arrow buttons
or the Jog Dial to increase or decrease the numbers.
The factory default LAN settings are:
1. Highlight the box beside DNS Server and then press .to enter the IP address of
the DNS server. If you set the DNS Server, the domain name of the DVRNS server
instead of the IP address can be used during the DVRNS Server setup. See
DVRNS (DVR Name Service) Setup Screen, page 66 for detailed information on
DVRNS Server setup.
2. Highlight Port Number Setup … and then press to display the Port Number
Setup screen.
Figure 3-50 Port Number Setup Screen
Note Obtain the appropriate Port Number for each RAS related
program (Admin, Watch, Search, and Callback) from your
network administrator.
To change the number, highlight it and use the Up and Down arrow buttons to increase
or decrease the number.
IP Address 192.168.1.129
Gateway 192.168.1.254
Subnet Mask 255.255.255.0