Filter
Top Products
Installation
Rev 3.03 14 Document 900.0315
02/07
Connecting to the USB Port
Figure 2-14 USB Connector
Use the USB port to connect external hard disk drives, CD-RW drives, or flash drives for
archiving video.
1. Position the external hard disk drive close enough to the DVR so that you can
make the cable connections, usually less than 6 feet (1.83 m).
2. Use the USB cable provided with the hard disk drive or CD-RW to connect it to the
DVR.
See Chapter 4, Operation for archiving video to an external USB-IDE hard disk drive,
USB CD-RW drive or USB flash drive.
You can also upgrade the software through the USB port.
Connecting the Power Cord
Figure 2-15 Power Cord Connector
Connect the power cord of the adapter to the DVR and the other end to the wall outlet.
USB
100-240 V ~ 50/60 Hz, 2 A