Filter
Top Products
Configuration
Rev 3.03 46 Document 900.0315
02/07
Caution When the End of Disk is set to Stop, the DVR will NOT restart
recording, even after video recorded earlier than the user-defined
period is deleted.
6. To save your changes, highlight OK and then press . Selecting Cancel exits the
screen without saving the changes.
Time-Lapse Record Mode Setup Screen
Access the Time-Lapse Record Setup screen (MENU ➤ Record ➤ Time-Lapse
Record). The Time-Lapse Record Setup screen displays.
Figure 3-31 Time-Lapse Record Setup Screen
1. Highlight the box under the Speed heading and then press . A drop-down list of
recording speeds displays. You can select from 0.5 ips to 30 ips (25 ips for PAL).
Note You cannot select 30 ips (25 ips for PAL) if the Resolution is set
up to High or Very High in the Record Mode Setup screen.
2. Highlight the box under the Quality heading and then press . A drop-down list
displays. You can select from Very High, High, Standard, and Low image quality.
All other variables being equal, Very High will require 300% more hard disk space
than Standard, High will require 200% more, and Low 50% less.
Note Higher quality images require more storage space and reduce
the recording capacity of the hard disk drive.