Filter
Top Products
116
Using the Setup Menus
You can change the settings of the recorder,
such as picture quality settings, audio
settings, etc.
1 Press SYSTEM MENU while the
recorder is in stop mode.
2 Select “Disc Setup” or “Initial
Setup” using M/m, and press ENTER.
3 Select the desired setup item using
M/m, then press ENTER.
See the explanations in the following
sections.
The default settings are underlined.
Disc Settings (Disc
Setup)
You can adjust DVD related settings.
Input Disc Name
You can label a disc.
For details, see page 41.
Protect Disc
You can protect a disc against erasure.
For details, see page 42.
Format DVD-RW (DVD-RW only)
The recorder automatically starts formatting
in VR mode or Video mode, whichever is
selected below, when a new, unformatted
DVD-RW is inserted.
You can manually re-format a DVD+RW,
DVD-RW, or DVD-R disc to make a blank
disc.
For details, see page 45.
Finalises a disc to play it on other DVD
equipment.
For details, see page 43.
Basic
VR Mode Automatically formats the
disc in VR mode.
Video
Mode
Automatically formats the
disc in Video mode.
Format
Finalise