Filter
Top Products
136
GUIDE Plus+ system does not appear.
, 1Even if you complete “Easy Setup,” TV
programme listings do not appear until the
recorder receives the GUIDE Plus+ data.
2Turn off the recorder, but do not unplug
it. 3Wait for 24 hours. It may take several
days for the recorder to receive the GUIDE
Plus+ data for all programme positions. If
the recorder does not receive the GUIDE
Plus+ data after 24 hours, set the host
channel manually (page 50).
, The host channel is disabled. Show and
enable the host channel (page 51).
, The timer is set. Cancel the timer setting.
, The clock is incorrect. Set the clock
manually (page 117).
, The country/region or postal code is
incorrect. Correctly set your country/
region and postal code (page 25).
, When the recorder is connected to a set top
box receiver, the set top box receiver must
be turned on to download the GUIDE
Plus+ data.
, If the set top box receiver is connected to
the recorder using a SCART cord only, try
the following: 1Turn on your set top box
receiver. 2Connect the set top box
controller. 3Follow the steps in
“Changing the GUIDE Plus+ host channel
manually (Setup)” (page 50) to set the host
channel manually. Be sure to set your set
top box receiver (tuner) as the source.
, Area numbers that cannot be received
using GUIDE Plus+ are set. Select “Easy
Setup” in the “Basic” setup from “Initial
Setup” in the System Menu, and follow the
on-screen instructions to make the settings
again (page 25).
, The “Time Lock” function on your cable
box is activated. Set this function to off.
, If the host channel has changed or moved,
the programme guide data cannot be
received. In this case, follow the steps in
“Searching for the GUIDE Plus+ host
channel (Setup)” (page 50) to update the
host channel setting. If the problem
persists after waiting for one day, search
for the host channel at the following
website and set the host channel manually
(page 50).
www.europe.guideplus.com
The programme position number in the
programme listing does not match the
broadcast station.
,
There may be more than one channel lineup
for your area. To change the channel lineup,
select “Editor” in the Menu Bar of the
GUIDE Plus+ system (page 51).
Programme listings for some programme
positions are missing.
, The programme guide data may not be
updated. Turn off the recorder and let the
recorder receive the programme guide
data.
, Some broadcast stations support only two
days of data. For details, refer to the
following website:
www.europe.guideplus.com
, All of the GUIDE Plus+ data could not be
received because the reception is poor.
The programme listing is not up to date.
, The recorder was in use during the time
that the GUIDE Plus+ data was scheduled
to be downloaded.
, All of the GUIDE Plus+ data could not be
received because the reception is poor.
There is no sound.
, Re-connect all connections securely.
, The connecting cord is damaged.
, The input source setting on the audio
component or the connection to the audio
component is incorrect.
, The recorder is in reverse play, fast-
forward, slow motion, or pause mode.
GUIDE Plus+ system (RDR-
AT105/AT107/AT205 only)
Sound