Filter
Top Products
108
Using the TV’s features
No Signal Power Down
No Signal Power Down
The TV will automatically turn itself off after 15 minutes when no
signal is detected.
❖ You can change the setting to Off for the following functions:
❖ Low signal strength of an analog channel (no signal detection)
❖ Only Audio L/R is connected to external input to listen to
music through the TV speakers.
1 From the Preferences menu, highlight Energy Saving
Settings, and then press the OK button.
2 Press the ( / arrow) buttons to select No Signal Power
Down, and then press the OK button.
3 Press the ( / arrow) buttons to highlight the item you wish
to change, and then press the ( / arrow) buttons to select
On/Off.
❖ Default setting for each input is On.
❖ A warning message appears approximately 1 minute before the
TV turns Off.
Using HDMI® CEC
This is a new feature that uses CEC technology and allows you to
control Toshiba HDMI® CEC compatible devices from the TV
remote control via an HDMI
®
connection.
When the Enable HDMI® CEC in the HDMI® CEC Setup menu is
set to On, the following HDMI® CEC functions are enabled.
HDMI® CEC playback device (DVD player, etc.) contr ol
With your TV’s remote control, or using the HDMI® CEC Player
Control menu, you can control the connected HDMI® CEC
playback device you are watching.
Available remote control key functions:
Button: Description:
PLAY Begin playback
STOP Stop playback
PAUSE Pause the picture during play or record mode
SKIP Forward Skip Forward
NOTE