Filter
Top Products
36
Connecting Your TV
Connecting a digital audio system
3 Press the ( / arrow) buttons to select Audio Setup, and then
press the INPUT button.
(Sample Image) Audio Setup screen
4 Press the ( / arrow) buttons to select Digital Output
Format.
5 Press the ( / arrow) buttons to select either Dolby Digital
or PCM, depending on your device.
(Sample Image) Audio Setup screen - Done
6 To save the new settings, highlight Done, and then press the
OK button.
To revert to the factory defaults, highlight Reset, and then
press the OK button.
❖ Some audio systems may not be compatible with Dolby Digital
bitstream signals. Older audio systems that are not compatible
with standard optical out signals may not work properly, creating
a high noise level that may damage speakers or headphones.
THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY.
❖ The DIGITAL AUDIO OUT terminal may not output some digital
audio sources because of copy restrictions.
NOTE