Filter
Top Products
117
Using the TV’s Advanced Features
Using the advanced picture settings
❖ If the current input is ANT/CABLE or VIDEO, the menu will
display the text “CableClear”. The available selections are Off,
Low, Middle, and High.
❖ If the current input is ColorStream
®
HD, HDMI 1 or HDMI 2, the
menu will display the text “DNR”. The available selections are
Off, Low, Middle, and High. Low, Middle, and High will reduce
the noise in varying degrees, from lowest to highest,
respectively.
4 To save your new settings, highlight Done, and then press the
OK button.
5 To revert to your original settings, highlight Reset, and then
press the OK button.
MPEG Noise Reduction
The MPEG Noise Reduction feature allows you to reduce visible
interference caused by MPEG compression. Choices for MPEG
Noise Reduction are Off, Low, Middle, and High. Off is
automatically selected when this feature is disabled (“grayed out”).
To select the MPEG Noise Reduction level:
1 Press the MENU button to open the Picture menu.
2 Highlight Noise Reduction, and then press the OK button.
3 Press the ( / arrow) buttons to highlight the MPEG Noise
Reduction field G Drive, and then press the ( / arrow)
buttons to select either Off, Low, Middle, or High.
4 To save your new settings, highlight Done, and then press the
OK button.
5 To revert to your original settings, highlight Reset, and then
press the OK button.
Using the Game Mode feature
You can use the Game Mode feature for shorter frame delays when
playing a video game requiring split-second timing between the
on-screen display and input from the controller (such as music
creation and high-action games).
This feature is more effective for 480i and 1080i input signals.
NOTE