Filter
Top Products
65
Using the TV’s features
Tuning channels using the Channel Browser
5 Press the ( arrow) button to highlight Inputs List, and then
press the ( / arrow) buttons to select On/Off.
6 Press the ( arrow) button to highlight Favorites List, and
then press the ( / arrow) buttons to select On/Off.
7 Press the ( arrow) button to highlight HDMI® CEC List,
and then press the ( / arrow) buttons to select On/Off.
HDMI® CEC List is automatically grayed out and set to Off when
Enable HDMI® CEC is switched to Off. See “Using HDMI® CEC”
on page 108.
8 To save the new entries, highlight Done, and then press the OK
button. To return to factory defaults, highlight Reset, and then
press the OK button.
To open the Channel Browser:
❖ Press the BACK CB/NEXT CB buttons on the remote control.
❖ Press the ( arrow) button to surf backward through the
previously tuned channels in the History list, the channels in
the ANT/ CABLE channel list, the inputs in the Inputs list, the
favorite channels/inputs in the Favorites list, or the
HDMI® CEC devices in the HDMI® CEC List.
❖ Press the ( arrow) button to surf forward through the channel
History, the ANT/CABLE channel list, the Inputs list, the
favorite channels/inputs in the Favorites list, or the
HDMI® CEC List.
Elements of the Channel Browser
(Sample Illustration) Channel Browser elements
1 Current list (History, ANT/CABLE, Inputs, Favorites, or
HDMI® CEC)
2 Input type
3 Channel or input currently being viewed
NOTE