Filter
Top Products
112
Using the TV’s features
Displaying TV status information
5 To save the new settings, highlight Done and press the OK
button. To revert to the factory defaults, highlight Reset and
press the OK button.
Displaying TV status information
To display TV status information:
❖ Press the INFO button on the remote control.
The following information will be displayed (if applicable):
❖ Current input (ANT/CABLE, Video, etc.)
❖ If ANT/CABLE is the current input, either “CABLE” (for
cable TV) or “ANT” (for over-the-air broadcasts).
❖ Channel number (if in ANT/CABLE mode)
❖ Channel label, if applicable
❖ Digital signal strength indicator (bar graph in lower right
corner of box; for ATSC signals only)
❖ Stereo, Mono, or SAP audio status (when in HDMI
®
input
mode, PCM)
❖ Video resolution
❖ Aspect ratio of incoming video signal (4:3 or 16:9)
❖ V-Chip rating status
❖ GameTimer (if set)
To close the screen (except ANT/CABLE input), press the INFO
button again.
The following additional information will display for ANT/CABLE
input, if applicable:
❖ Title
❖ Duration
❖ Detailed description
To display the next program’s information for digital channels,
press the INFO button again. Pressing the INFO button a third time
will remove the entire banner.
(Sample Illustration) Banner