Filter
Top Products
82
Using the TV’s features
Adjusting the audio
Using the digital audio selector
You can use the Digital Audio Selector to conveniently switch
between audio tracks on a digital channel (for those channels that
have multiple audio tracks). This temporarily overrides the audio
track chosen by the language option under Audio Setup, see
“Selecting stereo/SAP broadcasts” on page 82.
1 Press the MENU button to open the Sound menu.
2 Highlight Digital Audio Selector, and then press the OK
button.
(Sample Image) Digital Audio Selector screen
3 Press the ( / arrow) buttons to select the desired service.
4 Press the EXIT button.
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows you to output
high-fidelity stereo sound. MTS also can transmit a second audio
program (SAP) containing a second language, music or other audio
information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast, the stereo mark or
word “SAP” appears when the DISPLAY button is pressed. The
MTS feature is only available for analog signals on the
ANT/CABLE input.
To listen in stereo sound:
1 Press the MENU button to open the Sound menu.
2 Highlight Audio Setup, and then press the OK button.
3 In the MTS field, select Stereo.
4 To save the new settings, highlight Done, and then press the
OK button.
5 To reset the settings to the factory defaults, highlight Reset,
and then press the OK button.