Filter
Top Products
68
Using the TV’s features
Tuning channels
Tuning to the next programmed channel
Tuning analog channels:
Press the Channel Number (0–9) buttons on the remote control. For
example, to select channel 125, press 1, 2, 5, and then press the OK
button.
Tuning digital channels:
Press the Channel Number (0–9) buttons on the remote control,
followed by the Dash/100 button, and then the sub-channel number.
For example, to select digital channel 125-1,
press 1, 2, 5, –, 1, and then press the OK button.
If a digital channel is not programmed, either through the automatic
channel scan or the Channel add function, see “Auto Tuning” on
page 52, you will have to tune the RF channel using the Channel
Numbers and the Dash/100 button on the remote control.
Switching between two channels using Channel Return
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
1 Select the first channel you want to view.
2 Select a second channel using the Channel Number buttons
(and the Dash/100 button if selecting a digital channel).
3 Press the CH RTN button on the remote control. The previous
channel will display. Each time you press the CH RTN button,
the TV will switch back and forth between the last two
channels that were tuned.
If you press the CH RTN button from a non-antenna input, the TV will
return to the last-viewed input.
Switching between two channels using SurfLock™
The SurfLock™ feature temporarily “memorizes” one channel to
the CH RTN button, so you can return to that channel quickly from
any other channel by pressing the CH RTN button.
To memorize a channel to the CH RTN button:
1 Tune the TV to the channel you wish to program into the
CH RTN button.
NOTE
NOTE