Filter
Top Products
85
Using the TV’s features
Adjusting the audio
3 Press the ( / arrow) buttons to highlight the Audyssey
ABX™ field.
4 Press the ( / arrow) buttons to select On.
Using Audyssey Dynamic Volume
®
This feature provides a consistent sound volume between television
programs, commercials, and between the loud and soft passages of
movies.
1 Press the MENU button. Select Settings, SOUND, Audyssey
Premium Television, Dynamic Volume.
2 Press the ( / arrow) buttons to select ON or Off.
❖ If Dynamic Range Control is set to On, this feature is
automatically set to Off.
❖ This feature does not affect the audio signal output from the
DIGITAL AUDIO OUT terminal.
Selecting the optical audio output format
You can select the optical audio output format when you connect a
Dolby
®
Digital decoder or other digital audio systems to the TV’s
Digital Audio Out terminal.
To select the optical audio output format:
1 Press the MENU button to open the Sound menu.
2 Highlight Audio Setup, and then press the OK button.
3 In the Digital Output Format field, select either Dolby
Digital or PCM, depending on your device.
4 To save the new settings, highlight Done, and then press the
OK button.
5 To reset the settings to the factory defaults, highlight Reset,
and then press the OK button.
Using the Dolby
®
Digital Dynamic Range Control feature
You can further compress Dolby
®
Digital dynamic range, allowing
you to switch from digital to analog broadcasts at the same dynamic
range.
To use the Dolby
®
Digital Dynamic Range Control:
1 Press the MENU button to open the Sound menu.
NOTE