Filter
Top Products
97
Using the TV’s features
Using the PC settings feature
To unlock the control panel, select Off in Step 5 above or press and
hold the VOLUME (–) button on the TV control panel for a few
seconds until the volume icon appears.
Using the PC settings feature
You can view an image from a PC on the TV screen. When a PC is
connected to the TV's PC IN terminal, you can use the PC Settings
feature to make adjustments to the image. If the edges of the picture
are cut off, readjust the Horizontal Position and Vertical Position. If
the picture is affected by interference, readjust the Clock Phase and
Sampling Clock.
To adjust the PC settings:
1 Repeatedly press the INPUT button to select PC Input mode,
see “Adjusting the picture” on page 76.
2 Press the MENU button to open the Setup menu.
3 Press the ( / arrow) buttons to select PC Settings, and then
press the OK button.
(Sample Image) PC Settings screen
If a computer is not connected or there is no PC input signal, this
feature will be grayed out in the Setup menu.
4 Press the ( / arrow) buttons to select an item.
5 Press the ( / arrow) buttons to make the appropriate
adjustments.
(Sample Image) PC Settings - adjustments screen
HDMI-CEC Setup
NOTE