Filter
Top Products
58
Setting up your TV
Viewing the system status
To set the Daylight Saving Time status, press the ( / arrow)
buttons to select Ye s or No, highlight Done, and then press the OK
button.
Viewing the system status
1 Press the MENU button to open the Setup menu.
2 Highlight Installation, and then press the OK button.
A new set of Installation menu icons appear.
3 Open the System Status menu, highlight System
Information, and then press the OK button.
4 Press the ( / arrow) buttons to scroll through the menu bar
to select Factory Defaults or Support Information.
The related information appears.
To close the screen and return to the Installation menu highlight
Done in the Support Information screen or highlight No in the
Factory Defaults screen, and then press the OK button.
To return to normal viewing, press the CANCEL button.
Reset Factory Defaults
1 Press the MENU button to open the Setup menu.
2 Highlight Installation, and then press the OK button.
A new set of Installation menu icons appear.
3 Open the System Status menu, highlight System
Information, and then press the OK button.
4 Press the ( / arrow) buttons to scroll through the menu bar
to select Factory Defaults.
5 Highlight Ye s, and then press the OK button.
6 If a PIN code have been set, enter your PIN code.
7 Press the ( / arrow) buttons to select Done, and then press
the OK button.
A warning message appears.
8 Select Ye s, and then press the OK button.
the TV turns off automatically after a few seconds. After the
TV turns off, unplug the TV power cord and then plug it in
again to complete the reset process.
9 To cancel the reset process, select No, and press the OK
button.