Filter
Top Products
67
Using the TV’s features
Tuning channels
Adding and clearing channels and inputs in the History List
Adding channels and inputs to the History List:
As a channel or input is tuned, the Channel Browser adds it to the
History List and displays it on the right side of the Channel
Browser. Previously tuned channels/inputs are shifted to the left,
eventually moving off the left side. Press the BACK CB button to
surf backward through the previously tuned channels/inputs. Any
channel or input that is tuned repeatedly will not be repeated in the
History List, but instead is moved to the end of the list on the right
side of the Channel Browser.
The Channel Browser will store the following channels:
❖ All channels that are tuned using the numeric buttons on the
remote control.
❖ All channels that are tuned using the CH Up/Down buttons on
the remote control.
Whenever an item is selected that cannot be tuned (for various
reasons), the TV will automatically tune to the previously viewed
channel or input.
Clearing channels from the History List:
❖ Reconfiguring the ANT/CABLE input will clear the History
List.
❖ Turning off the TV will clear the History List.
Tuning channels
To tune to the next programmed channel, use the CH Up/Down
buttons on the remote control or TV control panel.
Tuning to a specific channel (programmed or unprogrammed)
Tuning analog channels:
Press the Channel Number (0–9) buttons on the remote control. For
example, to select channel 125, press 1, 2, 5, and then press the OK
button.
Tuning digital channels:
Press the Channel Number (0–9) buttons on the remote control,
followed by the Dash/100 button, and then the sub-channel number.
For example, to select digital channel 125-1,
press 1, 2, 5, –, 1, and then press the OK button.
NOTE