Filter
Top Products
111
Using the TV’s features
Using HDMI® CEC
Other HDMI® CEC functions
When the Enable HDMI® CEC and each item in the
HDMI® CEC Setup menu are set to On, the following functions
will be enabled.
When you turn on the Audio Receiver, change its input source or
adjust the sound volume, the sound will be output from the audio
receiver’s speakers even if TV Speakers has been selected. Turn the
TV off and on again to output the sound from the TV speakers.
To set the HDMI® CEC Setup:
1 From the Setup menu, highlight HDMI® CEC Setup and
press the OK button.
2 Press the ( / arrow) buttons to highlight Enable
HDMI® CEC.
3 Press the ( / arrow) buttons to select On.
If you select Enable HDMI® CEC Off, the other items will be grayed
out.
4 Press the ( / arrow) buttons to highlight the HDMI® CEC
Setup item you wish to use, and press then press the ( /
arrow) buttons to select On or the desired mode.
❖ TV Auto Input Switch: On/Off
❖ TV Auto Power: On/Off
❖ Device Auto Standby: On/Off
❖ Speaker Preference: TV Speakers/Audio Receiver
Item: Description:
TV Auto Input
Switch
If a connected HDMI
®
device starts playing video or audio, the TV will
automatically switch to the appropriate HDMI
®
input.
TV Auto Power If a HDMI® CEC device is turned on, the TV turns on automatically.
Device Auto
Standby
If the TV is turned off the TV will send a message to turn off all of the
HDMI® CEC devices connected to the TV.
Speaker
Preference
From this item, you can set your audio output preference to the TV speakers
or the audio receiver speakers. When this item is set to Audio Receiver, the
TV remote can be used to adjust or mute the volume of the audio. This item
will be grayed out unless a HDMI® CEC compatible audio receiver is
connected.
NOTE
NOTE