Filter
Top Products
Chapter 1 Introduction
EOC350 Series User’s Guide
13
1.3.2 Connections
Figure 4 EOC350-TA Connections
The following table describes the connections.
1.4 The RESET Button
If you forget your password or cannot access the web configurator, you will need to use the RESET
button at the back of the device to reload the factory-default configuration file. This means that you
will lose all configurations that you had previously and the passwords will be reset to the defaults.
To set the device back to the factory default settings, press the RESET button for 5 seconds.
Table 4 EOC350-TA Connections
ITEM DESCRIPTION
IN Connect this port to an existing coaxial cable outlet in the room that is in the same coaxial
network as the EOC350-TS in the building.
OUT Connect this port to an analog television directly if the EOC350-TS IN port is connected to
a satellite TV, cable TV or VHF/UHF antenna.
Ethernet Ports These are Fast Ethernet ports that can be used to connect to a set top box (STB) that then
connects to an analog television (or directly to a smart TV with an Ethernet port). The LED
is steady green when there is an Ethernet connection and blinks when there is traffic.
12V DC-IN Connect the included power adapter to a power outlet.
Link/Act
QLTY
IN
OUT
2
1
12V DC IN
PWR
OUT
IN Ethernet Ports
Power In