Filter
Top Products
Chapter 6 Administration
EOC350 Series User’s Guide
46
Figure 42 Administration > Administrator > Add or Edit
The following table describes the items in this screen.
6.3 The Allowed Source Screen
Use this screen to configure which computers are allowed access to the management interface.
Click Administration > Allowed Source to show the following screen.
Figure 43 Administration > Allowed Source
The following table describes the items in this screen.
Table 34 Administration > Administrator > Add or Edit
LABEL DESCRIPTION
Name Type the username of the administrator allowed to configure the EOC350-TS.
New Password Type the password to be used with the username.
Retype New
Password
Re-type the password to be used with the username.
Privilege Select the level of access.
Apply Click Apply to save your settings.
Back Click Back to return to the previous screen.
Table 35 Administration > Allowed Source
LABEL DESCRIPTION
IP Address This shows which source IP addresses are allowed access.
Subnet Mask
This shows which source IP subnet masks are allowed access.
Telnet
This shows whether telnet access is allowed by this rule.
HTTP
This shows whether HTTP access is allowed by this rule.
SNMP
This shows whether SNMP access is allowed by this rule.
Ping
This shows whether this rule allows the device to respond to pings.