Filter
Top Products
EOC350 Series User’s Guide 56
CHAPTER 10
Maintenance
10.1 Overview
This chapter describes how to:
• reboot the system.
• restore default settings.
• put new firmware in the upload area.
• copy new firmware from the upload area to the working area and restart with it.
• download and upload configuration files.
10.2 Rebooting the System
Click Reboot System to reboot the termination system.
10.3 Restoring Default Settings
Click Default Setting to reset the termination system to default settings.
10.4 Uploading Firmware
Follow these steps to put new firmware in the upload area and optionally activate it.
1 Click Upload Firmware to begin.
Figure 55 Upload Firmware
2 Click Upload.