Filter
Top Products
Chapter 5 EP Management
EOC350 Series User’s Guide
41
1 On the EP Management screen, click the Test button in the termination adapter configuration
region of the screen.
Figure 34 Termination Adapter Test
2 Click Noise. The termination adapter measures the noise spectrum and shows the following screen.
Figure 35 Termination Adapter Noise Test
5.9.2 Online Diag
Follow these steps to measure some signal parameters at the termination adapter’s coax interface
without shutting down packet forwarding services.
1 On the EP Management screen, click the Test button in the termination adapter region of the
screen.