ZyXEL Communications EOC350 VCR User Manual


 
Chapter 11 Telnet
EOC350 Series User’s Guide
64
epswmacfilter -m <mac>
[-c <on/off> -s <set id> [-a
<hostmac>]]
Display or setup termination adapter Host MAC
Filter rule #0~5
-c: <on/off>: set host MAC filter rule #<set
id> to ON or OFF, to enable or disable the host
MAC filter rule
-s: <set> the host MAC filter rule index (0~5)
-a: <hostmac> specified host MAC address of
the filter rule
epswigmp
epswqosq
epswqosrate
epswqostc
epswtagvlan
-m <mac> Refer to the respective 'swigmp', 'swqosq',
'swqosrate', 'swqostc' and 'swtagvlan' commands
for details. These EP commands have the same
functionality, but operate on termination adapters
with the MAC address <mac>.
filter [-s <set> [-c <act/deact>] [-a <ip>
-m <mask>] [-t <allow/deny>] [-w
<allow/deny>] [-n <allow/deny>] [-
p <allow/deny>] ]
Display or setup the filter rule set for IP <ip> and
Subnet Mask setup <mask>.
<set>: filter set index, (0~15)
<act/deact>: activate or deactivate the rule
set
<allow/deny>: allow or deny the protocol
-t: telnet
•-w: http/web
•-n: snmp
-p: reply to ICMP ping
help Display all commands with brief descriptions
hpnareboot Reset termination system EoC device
ipconfig [-a <ip> -m <mask> -g <default
gateway>]
Display or setup system IP network, including IP
address <ip>, subnet mask <mask>, and default
gateway <default gateway>.
logserver [-s <set> [-c <act/deact>] [-a <ip
or host> -v <severity> ] [-m <tcp/
udp>] [-p <port>] ]
Display or setup Unix-like syslog servers (5
servers max)
<set>: server index (0~4)
<act/deact>: activate or deactivate the syslog
server with IP address <ip> or host name
<host>
<severity>: select the severity level, default
level 6 (info)
-m: syslog over TCP or UDP, default 'udp'
-p: TCP or UDP port number (0~65535),
default 514
master [-m <on/off>]
[-k <key(0x…)>]
[-n <note>]
Setup termination system EoC device Privacy
Mode settings. Use the 'upmaster' command to
take effect on termination system device. (replace
the working values with the setting ones) Use the
'upep' command to upgrade a termination adapter
with the new 'Privacy Mode/Key'.
<on/off>: set 'Privacy Mode' to ON or OFF,
default OFF
<key (0xnnnn)>, n is 0~F: 4-digit 'Privacy
Key' in hexadecimal, default 0x0
<note>: termination system note, max 32
chars
Table 50 Generic Telnet Commands (continued)
COMMANDS
ARGUMENTS
[ ] IS OPTIONAL
DESCRIPTION