Filter
Top Products
EOC350 Series User’s Guide 22
CHAPTER 5
EP Management
5.1 Overview
This chapter describes how to view and configure the EOC350-TS (see Figure 3 on page 11) and the
EOC350-TAs (see Figure 4 on page 13) connected to it, and test connectivity between them.
Note: The EOC350-TA is an End Point (EP).
5.2 The EP Management Screen
Use this screen to view, configure and test the termination system and termination adapters. Click
EP Management to show the following screen.
Figure 10 EP Management
The screen is divided into these regions:
• A - local termination system device configuration
• B - default profile configuration for termination adapters
• C - termination adapter configuration
B
A
C