Filter
Top Products
Chapter 6 Administration
EOC350 Series User’s Guide
48
Figure 45 Administration > Telnet Setup
The following table describes the items in this screen.
6.5 The HTTP Setup Screen
Use this screen to enable and configure the HTTP server. Click Administration > HTTP Setup to
show the following screen.
Figure 46 Administration > HTTP Setup
The following table describes the items in this screen.
Table 37 Administration > Telnet Setup
LABEL DESCRIPTION
TELNET Server Select whether the telnet service is disabled or enabled.
TELNET Port Type the telnet port number.
TELNET Idle
Time
Type the time after which automatic logout occurs.
Apply Click Apply to save your settings.
Table 38 Administration > HTTP Setup
LABEL DESCRIPTION
HTTP Server Select whether the HTTP service is disabled or enabled.
Note: If you disable this, then you cannot access the web configurator.
HTTP Port Type the HTTP port number.
Apply Click Apply to save your settings.