Filter
Top Products
Chapter 5 EP Management
EOC350 Series User’s Guide
31
Figure 21 EP Management > Ether > Config (profile)
The following table describes the items in this screen.
5.7.2 The Port Screen
Use this screen to throttle the bandwidth of the termination adapter’s interfaces. Click EP
Management > Ether > Config > Port on the default profile to show the following screen.
Figure 22 EP Management > Ether > Config > Port (profile)
The following table describes the items in this screen.
Table 18 EP Management > Ether > Config (profile)
LABEL DESCRIPTION
Note Type a note here.
Host Limit Type the maximum hosts allowed to connect to the termination adapter. Service is disabled if
this is 0.
Apply Click Apply to save your settings.
Back Click Back to return to the previous screen.
Table 19 EP Management > Ether > Config > Port (profile)
LABEL DESCRIPTION
Port This shows the port name for this row.
Service
Select On to enable this port or Off to disable it.