Filter
Top Products
Chapter 5 EP Management
EOC350 Series User’s Guide
39
5.8.6 The Filter Screen
Use this screen to configure the hosts that are allowed to send and receive traffic via the
termination adapter’s interfaces. Click EP Management > Ether > Config > Filter on the
termination adapter to show the following screen.
Figure 32 EP Management > Ether > Config > Filter (termination adapter)
The following table describes the items in this screen.
5.8.7 The Status Screen
Use this screen to see the status of the termination system’s interfaces. Click EP Management >
Ether > Config > Status on the termination adapter to show the following screen.
Apply Click Apply to save your settings.
Back Click Back to return to the main EP Management screen.
Table 28 EP Management > Ether > Config > VLAN (termination adapter) (continued)
LABEL DESCRIPTION
Table 29 EP Management > Ether > Config > Filter (termination adapter)
LABEL DESCRIPTION
Allowed Host
MAC
This shows the hosts that are allowed to send and receive traffic via the termination adapter.
If no hosts are listed then all hosts are allowed, otherwise only the listed hosts are allowed.
Add Type a MAC address and then click Add to add a host to the Allowed Host MAC list.
Del Click Del to delete a host from the Allowed Host MAC list.
Back Click Back to return to the main EP Management screen.