Filter
Top Products
Chapter 6 Administration
EOC350 Series User’s Guide
47
Click Add or Edit to see the following screen.
Figure 44 Administration > Allowed Source > Add or Edit
The following table describes the items in this screen.
6.4 The Telnet Setup Screen
Use this screen to enable and configure the telnet server. Click Administration > Telnet Setup to
show the following screen.
Edit Click this to edit an existing access rule.
Add Click this to add a new access rule.
Del Click this to delete an access rule.
Table 36 Administration > Allowed Source > Add or Edit
LABEL DESCRIPTION
Source IP
Address
Type the source IP address that is allowed access by this rule.
Source Subnet
Mask
Type the source IP subnet mask that is allowed access by this rule.
Via Telnet
Select Enable to allow telnet access via this rule.
Via HTTP
Select Enable to allow HTTP access via this rule.
Via SNMP
Select Enable to allow SNMP access via this rule.
Ping Reply
Select Enable to allow the device to respond to pings via this rule.
Apply Click Apply to save your settings.
Back Click Back to return to the previous screen.
Table 35 Administration > Allowed Source (continued)
LABEL DESCRIPTION