Filter
Top Products
EOC350 Series User’s Guide 21
CHAPTER 4
Auto Configuration
4.1 Overview
This chapter describes how to automatically distribute configuration files.
4.2 The Auto Configuration Screen
Use this screen to setup automatic retrieval and distribution of (*.shc and *.ep) configuration files
from a TFTP server. Click Auto Configuration to show the following screen.
Figure 9 Auto Configuration
The following table describes the items in this screen.
Table 8 Auto Configuration
LABEL DESCRIPTION
Auto
Configuration
by TFTP
Click Enable to make the termination system automatically get configuration via TFTP and
distribute this configuration to termination adapters.
TFTP Server
Name
Type the address of the TFTP server.
Directory Path Type the source directory on the TFTP server in which the configuration files are stored.
Auto Upgrade
EP EoC Driver
Click Enable to make the termination system automatically upgrade the termination
adapter’s Ethernet over Coax (EoC) driver.
Apply Click Apply to save your settings.