Filter
Top Products
EOC350 Series User’s Guide 53
CHAPTER 8
System Time
8.1 Overview
This chapter describes how to configure and see the system time.
8.2 The SNTP Setup Screen
Use this screen to configure when and where the time is updated from. Click System Time >
SNTP Setup to show the following screen.
Figure 52 System Time > SNTP Setup
The following table describes the items in this screen.
Table 44 System Time > SNTP Setup
LABEL DESCRIPTION
Enable SNTP Select Enable to enable the termination system to update its time automatically via the
Simple Network Time Protocol.
Primary SNTP
Server
Type the address of the primary SNTP server.
Secondary
SNTP Server
Type the address of the secondary SNTP server.
Time Zone Type the time difference for the time zone.
Update Period Type how often the time is updated via SNTP.
Apply Click Apply to save your settings.