Filter
Top Products
2
BASIC SETUP
1. Connect the cameras
a. Connect BNC cameras to the BNC ports on the
rear panel.
2. Connect a monitor
a. Connect a VGA cable (not included) from the VGA
port on the rear panel to the VGA port on your
monitor.
OR
b. Connect a BNC terminated cable from one of the
Video OUT port
s to a TV or CCTV monitor.
3. Connect the mouse (USB or PS/2)
a. Connect the mouse to the USB mouse port on the
rear panel.
NOTE: If using a PS/2 mouse, a USB adapter will
be required (not included).
4. Connect the Ethernet cable
a. Connect an Ethernet cable to the LAN port on the
rear panel of system; connect the other end of the
Ethernet cable to an empty LAN port on your
router or switch (not included).
5. Connect the power cable
a. Connect the power supply to the DC 12V port on
the rear panel of the system; connect the power
cable to an outlet, power strip, or surge protector.
Figure 1.0 Connect BNC cameras to the system
Figure 1.1 Connect to a VGA or CCTV monitor, or a TV
Figure 1.2 Connect an Ethernet cable and mouse
Figure 1.3 Connect the power cable