Filter
Top Products
61
Remote Setup
CAMERA
To configure Camera options:
1. Select a camera icon at the top of the window.
2. For the selected camera configure the
fol
lowing:
• COVERT: Sel
ect YES/NO. If YES, the camera
channel will be obscured from live viewing to
give the impression that no camera is
recording. Use this option if the display
monitor is in public view.
NOTE: The
Covert channel will use the same
ba
ckground color as a disconnected
camera. To change the background color,
see see “DISPLAY” on page 60.
• BR
IGHTNESS, CO
NTRAST, COLOR: Adjust
from 0~100.
• TITLE: enter a name/title for the camera
• PTZ MODEL: Sele
ct the model of your
connected PTZ camera from the drop-down
menu
• PTZ I
D:
Enter your PTZ ID (PTZ ID should
match the camera channel to which you have
connected the PTZ camera)
3. Repeat steps 1~2 for any remaining cameras.
4. Click
APPLY and then OK to save your
settings and close the window.
MOTION
To configure Motion options:
1. Under RECORD TIME, adjust the time from
10~300 seconds.
NOTE: The set re
cording time is applicable
to all channels.
2. Under CAMERA SELECT, select a ca
m
era icon.
3. Under SENSITIVITY, and adju
st from 1~20. The
higher the number, the greater the sensitivity.
4. Under MOTION GRID,
click one o
f the grid
icons to apply a
motion grid to the
selected camera.
NOTE: Disabl
ed
bl
ocks are colored
grey
. Active blocks will
be
turquoise-colored
when motion is
detected.
5. Repeat steps 1~4 for any re
maining cameras.
6. Click APPLY and
then OK to save your settings
and close the window.
Figure 33.0 Camera options
Figure 34.0 Motion options
Figure 34.1 Motion icons