Filter
Top Products
30
Using the Main Menu
DISK
Use the Disk menu to format the internal HDD,
external USB flash drive (not included),
external USB HDD, and configure Overwrite
and Disk Monitor settings.
Formatting Disks
To format the internal HDD/external HDD/USB
flash drive:
1. Under the DISK tab, select
FORMAT and
select Internal HDD, USB HDD, or USB
Memory Stick
.
2. Under ACTION, select
START. Formatting
begins. Once formatting is complete the
system will reset (internal HDD
only
).
3. Press
CANCEL/ESC to close windows (USB
flash drive
only
).
Overwrite
Disk overwrite will overwrite the oldest data on
the internal HDD once it full.
To enable/disable disk overwrite:
1. Under the DISK, select
OVERWRITE and
select
ON/OFF. If OFF, the system will stop
recording once the HDD is full.
NOTE: By default, the system is set to
overwrite.
2. Press the
ENTER button to save your
settings.
Disk Monitor
If enabled, Disk Monitor will alert you if the
internal HDD fails.
To enable/disable disk monitoring:
1. Under the DISK tab, select
START/STOP.
2. Press the
CANCEL/ESC button close.
Figure 19.2 Disk menu
ATTENTION: You must stop all recording
before attempting to format the internal HDD.