Filter
Top Products
65
Remote Setup
DDNS
To configure DDNS options:
1. Under USE, select DEFAULT.
2.
Under DOMAIN NAME, enter your
Digi
merge DDNS domain name from the
confirmation email.
3. Under USER ID, enter your
Digimerge DDNS
user name/ID
.
4. Under PASSWORD, enter your Digimerge
DDNS password.
5.
Click APPLY and
then OK to save your
settings and close the window.
SYSTEM
To configure general system options:
1. Select the GENERAL TAB (default) and
co
nfigure the following:
• AUTO KEY LOCK
: Select ON/OFF. If ON,
the front panel touch-screen will be
disabled after 3 minutes of inactivity. Enter
your system password (by default, 000000)
to disable
• KEY TONE: Sel
ect ON/OFF. If ON (default),
the system will "beep" whenever a button
is pressed on the front panel or remote
control
• OVERWRITE: Sel
e
ct ON/OFF. If ON, the
system will overwrite the earliest
recorded video on the hard disk when the
HDD is full
• RESOLUTION: Fr
om the drop-down menu
select CIF 4CH, FIELD 4CH, FRAME 4CH,
CIF 8CH, FIELD 8CH, FRAME 8CH, or CIF
+ FRAME.
NOTE: Recording must be stopped on the DVR
in order to change the resolution.
NOTE: Resolution may vary by model.
2. Click APPLY and then OK to save your
settings and close the window.
Figure 38.2 DDNS options
Figure 39.0 System options—General