29
Using the Main Menu
SYSTEM
Configure System settings.
GENERAL
To configure general system settings:
1. Select the GENERAL tab and configure the
fol
lowing:
• AUTO LOCK: Select ON/OFF. If ON, the front panel
touch-screen will be disabled after 3 minutes of
inactivity. Enter your system password (by default,
000000) to disable.
NOTE: Auto Lock is not available if
Password is set to "OFF."
• KEY TONE: Select ON/OFF. If ON (default), the
system will "beep" whenever a button is pressed on
the front panel or remote control
•
RECORD MODE: Displays the current resolution
on the system. To edit, you must use DVR NetView
remote client software (included). For details, see
“SYSTEM” on page 65.
•
PB INTERLACE: Select ON/OFF. If ON, image
flickering will be reduced, but overall image quality
may also be reduced. If OFF, there will be better
image quality on still images, but image flickering
during live viewing and playback.
•
RUN ON BOOT: This option sets the default
recording mode when the system starts up. Select
CONTIN. REC for Continuous recording; select
SCHEDULE REC for the system to record
according to a recording schedule(s). For more
details on setting recording schedules, see see
“SCHEDULE” on page 25.
•
PASSWORD: Select ON/OFF. If ON, the system will
prompt you for a password when opening the main
menu
NOTE: You must set the Password to
"ON" in order to use the Auto Lock.
• FACTORY DEFAULT: Select START and press the
ENTER button to restore the system to the original
factory settings
• KEY SENSITIVITY: Adjust the sensitivity of the
buttons on the front panel from
1 (low) ~ 5 (high)
2. Press ENTER to save your settings. Press
CANCEL/ESC to close remaining windows.
TIME
For more details, on setting the date and time,
see “Recording” on page 16.
ACCOUNT
Only the ADMIN can configure user authorities
on the system.
To configure user and account settings:
1. Select the ACCOUNT tab, and configure
the fo
llowing:
• USER: Select ADMIN or USER1~5.
• ACTIVATE: Select ON/OFF to enable the settings
for the specific user type
• AUTHORIZATION: Select MONITORING,
BACKUP, NETWORK, PLAYBACK,
CONFIGURATION, or SHUTDOWN
• PASSWORD: Enter a 6-digit password for the
user
2. Press the ENTER button to save your
settings.
Figure 19.0 Setup menu
Figure 19.1 Account menu